Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

Introduction of Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

The Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

Compact design: Because no additional isolation components are required, Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KBs are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB)

Specification of Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

The 30 Amp Bridge Rectifier 112MT80KB is a single-phase diode bridge rectifier module designed to convert alternating current (AC) to direct current (DC). It handles up to 30 amps of average forward current. The module works with voltage ranges from 80 volts to 1000 volts. This makes it suitable for industrial and commercial power supplies.

The rectifier uses high-grade silicon diodes. These diodes ensure efficient energy conversion. They minimize power loss during operation. The module has a surge current capacity of 300 amps. This protects against sudden power spikes. The design includes low forward voltage drop. Heat generation stays controlled during use.

The housing is made of insulated epoxy resin. This material provides electrical insulation. It also resists heat and physical damage. The module meets UL certification standards. Safety and reliability are confirmed for various environments. Thermal resistance is optimized. External heatsinks can be added for better heat management.

Mounting the module is straightforward. It fits standard chassis or heat sinks. Screw terminals secure wire connections. This ensures stable contact. Maintenance is simple. No complex tools are required.

Common applications include motor drives, battery chargers, and welding equipment. It works in AC/DC converters for appliances. The rectifier is compatible with transformers and capacitors. Automation systems and power supply units often use this module.

Safety features include overcurrent protection. Reverse voltage tolerance prevents damage from incorrect wiring. The design avoids short circuits. Stable performance is maintained under heavy loads.

The module ships in anti-static packaging. This prevents damage during transit. Storage conditions are standard. No special handling is needed.

Compatibility covers multiple voltage inputs. Both 50 Hz and 60 Hz frequencies work. Integration into existing systems is easy. The rectifier supports upgrades or replacements in older setups.

Durability is tested under high-stress conditions. Long-term use shows consistent results. The module resists vibration and temperature fluctuations. Minimal performance degradation occurs over time.

Technical support is available for installation queries. Custom configurations can be requested. Bulk orders are accepted for large projects. Replacement parts are stocked for quick shipping.

(Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB)

Applications of Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

The 30 Amp Bridge Rectifier 112MT80KB is a single-phase diode bridge rectifier module designed for converting AC voltage to DC voltage. This component is essential in many electronic systems needing stable DC power. It handles up to 30 amps of continuous current. It works with input voltages up to 800 volts. Its robust design makes it reliable for industrial and commercial uses.

This rectifier is commonly used in power supplies. It converts AC from wall outlets to DC for devices like computers and printers. It ensures steady operation by smoothing out voltage fluctuations. Factories use it in machinery controls. Motor drives rely on it for consistent power delivery. Battery chargers employ it to transform AC into usable DC for charging.

The module’s high current capacity suits heavy-duty applications. Welding equipment uses it to maintain stable arcs. Industrial heaters depend on it for efficient energy conversion. Renewable energy systems integrate it for solar or wind power conversion. It helps store energy in batteries by rectifying generated AC.

Heat dissipation is critical in high-power setups. The 112MT80KB includes a metal housing. This design spreads heat evenly. It prevents overheating during prolonged use. The module’s compact size saves space in tight installations. Its screw terminals allow secure wire connections. This reduces the risk of loose contacts.

Automotive systems benefit from this rectifier. Electric vehicle chargers use it to process AC input. It supports onboard electronics requiring DC power. LED lighting systems apply it for flicker-free operation. Elevators and escalators utilize it for motor control circuits.

The diode bridge structure ensures full-wave rectification. This doubles efficiency compared to half-wave designs. It minimizes energy loss. Low forward voltage drop reduces heat generation. This extends the component’s lifespan.

Safety features include isolation between terminals. This prevents short circuits. Surge tolerance protects against voltage spikes. It meets international standards for reliability. Maintenance is minimal due to solid-state construction.

Hobbyists and engineers choose this module for DIY projects. It simplifies prototyping power circuits. Repair shops keep it as a replacement part. Its versatility across industries makes it a practical solution. The 112MT80KB balances performance and durability. It remains a go-to option for converting AC to DC efficiently.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB

What is the 30 Amp Bridge Rectifier 112MT80KB used for? The 30 Amp Bridge Rectifier 112MT80KB turns AC voltage into DC voltage. It is used in power supplies, motor drives, battery chargers, and devices needing stable DC power. It handles up to 30 amps of current. It works in industrial machines and consumer electronics.

What are the key features of this rectifier? The rectifier supports 30 amps of continuous current. It has low forward voltage drop for efficient power conversion. The compact size saves space in circuits. It includes thermal management to reduce overheating risks. The materials are durable for reliable performance in harsh environments.

What is the maximum input voltage supported? The rectifier handles up to 800 volts peak repetitive reverse voltage. This rating allows safe use with standard AC power sources. It protects against voltage spikes. Always verify the input voltage matches the device’s specifications before installation.

How should the rectifier be installed? Attach the rectifier to a suitable heat sink. Secure mounting prevents loose connections from vibrations. Connect terminals correctly to avoid reversed polarity. Keep operating temperatures below 125°C. Ensure proper ventilation around the module for heat dissipation.

What safety precautions are necessary? Inspect the rectifier for physical damage before use. Never exceed the current or voltage limits. Wear insulated gloves and use tools with insulated handles. Disconnect power before making wiring changes. Install the device in dry areas with stable temperatures.

(Electric Equipment Single Phase Diode Bridge Rectifier Module 30 Amp Bridge Rectifier 112MT80KB)