SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

Introduction of SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

The SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

Compact design: Because no additional isolation components are required, SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXYs are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY)

Specification of SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

The SKR130/18 SKN/26/16 Semicontrolled Power Diode (YXY) is a high-performance semiconductor tool created for robust power control applications. It integrates dependability and efficiency, making it appropriate for commercial systems, electric motor drives, traction systems, and renewable energy inverters. This diode runs in semicontrolled setting, making it possible for partial control over conduction for optimized power management while maintaining simplicity in circuit style.

Key requirements consist of a maximum repeated reverse voltage (V_RRM) of 1800V and a typical forward present (I_FAV) of 130A, ensuring secure operation under high-voltage, high-current conditions. The non-repetitive top surge existing (I_FSM) gets to 2600A, giving strength versus short-term overloads. Forward voltage drop (V_F) is generally 1.6 V at small current, reducing conduction losses and improving energy performance.

Thermal performance is important, with an optimum joint temperature level (T_J) of 150 ° C and a thermal resistance (R_th) of 0.12 ° C/W, assisting in reliable warmth dissipation. The device sustains installing using press-fit or screw terminals, housed in a rugged, insulated module compliant with worldwide safety and security criteria. Its reverse healing time (t_rr) of 26μs ensures marginal switching losses in high-frequency applications.

Mechanically, the diode is developed to withstand rough atmospheres, featuring a corrosion-resistant housing and protected electric seclusion. Running temperature arrays from -40 ° C to +125 ° C, with storage conditions as much as +150 ° C. Compliance with IEC and UL standards assurances integrity in commercial and automobile settings.

Applications consist of correction in DC power materials, braking systems for electric lorries, and energy conversion in wind/solar installments. Its semicontrolled design allows integration right into crossbreed circuits with thyristors or transistors, offering adaptability in power electronic devices layout. Security attributes consist of overvoltage and rise defense, ensuring longevity in dynamic tons problems.

The SKR130/18 SKN/26/16 Semicontrolled Power Diode (YXY) balances efficiency, sturdiness, and convenience of integration, making it a preferred selection for designers prioritizing efficiency and toughness in high-power systems.

(SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY)

Applications of SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

The SKR130/18 SKN/26/16 Semicontrolled Power Diode =YXY is a high-performance semiconductor gadget made for requiring power electronics applications. Combining durable building with sophisticated semicontrolled functionality, this diode is engineered to deliver reliable correction and controlled changing in high-voltage, high-current settings. Its unique design sustains industrial systems needing specific power monitoring, dependability, and toughness under severe functional conditions.

** Trick Applications: **.
1. ** Industrial Rectifiers: ** The diode is commonly utilized in AC/DC correction circuits for industrial equipment, such as electroplating systems, welding tools, and induction home heating. Its ability to deal with high surge currents and reverse voltages ensures stable conversion of alternating current to direct current, lessening energy loss.

2. ** Electric Motor Drives and Grip Systems: ** In motor control applications, consisting of electrical engines and heavy-duty conveyor systems, the SKR130/18 SKN/26/16 offers smooth commutation and reduces harmonic distortions. Its semicontrolled feature allows partial phase control, enhancing performance in variable-speed drives.

3. ** Renewable Energy Systems: ** The diode plays an important function in solar inverters and wind turbine converters, where it takes care of bidirectional power flow and protects circuits from voltage spikes. Its reduced forward voltage decline (typically listed below 1.5 V) makes sure marginal power dissipation in photovoltaic or pv varieties and grid-tied systems.

4. ** Uninterruptible Power Supplies (UPS): ** By incorporating this diode right into UPS systems, customers take advantage of rapid switching during power interruptions, ensuring smooth shifts in between grid and back-up power. Its high thermal security avoids overheating in continuous-operation scenarios.

5. ** Pulsed Power Equipments: ** The device’s quick recovery time and high rise tolerance make it ideal for pulsed applications like medical imaging equipment, laser motorists, and radar systems, where precise timing and energy distribution are critical.

** Technical Advantages: **.
The SKR130/18 SKN/26/16 features a low leakage present and high joint temperature level tolerance (approximately 150 ° C), guaranteeing reliability in severe atmospheres. Its modular style streamlines installment in press-pack or stud-mounted arrangements, while the semicontrolled architecture offers a balance between diode simpleness and thyristor-like controllability.

Constructed with silicon carbide (SiC) or innovative silicon modern technology, this diode minimizes changing losses and electromagnetic disturbance (EMI), aligning with modern power efficiency requirements. Whether in manufacturing, transportation, or renewable energy, the SKR130/18 SKN/26/16 Semicontrolled Power Diode =YXY stands apart as a versatile, high-efficiency service for next-generation power electronic devices.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY

What is the SKR130/18 SKN/26/16 Semicontrolled Power Diode (YXY) used for? The SKR130/18 SKN/26/16 is designed for high-power rectification and control in industrial applications. It is commonly used in motor drives, power supplies, welding equipment, and traction systems where efficient conversion of AC to DC and controlled power flow is required. Its semicontrolled operation allows partial management of current flow, balancing performance and cost in medium-to-high voltage environments.

What are the key features and benefits of this diode? The diode offers a high current rating (130A average forward current) and a blocking voltage of 1800V, making it suitable for demanding environments. Key features include low forward voltage drop for reduced power loss, robust thermal stability, and a semicontrolled design that enables precise current regulation. Benefits include improved energy efficiency, extended lifespan under high-stress conditions, and compatibility with dynamic load requirements.

What are the technical specifications of the SKR130/18 SKN/26/16? The diode operates at an average forward current of 130A, a peak repetitive reverse voltage of 1800V, and a non-repetitive surge current of up to 2600A. It has a typical forward voltage drop of 1.6V at rated current and a reverse recovery time optimized for reduced switching losses. The operating temperature range is -40°C to +150°C, ensuring reliability in harsh conditions.

How does thermal management work for this diode? Effective heat dissipation is critical. The SKR130/18 SKN/26/16 is designed with a press-fit or screw-mounted package for secure attachment to heatsinks. Users must ensure proper cooling via forced air or liquid systems in high-load scenarios. Thermal derating guidelines should be followed to prevent overheating, and thermal interface materials like grease or pads are recommended to enhance heat transfer.

Is this diode safe for high-voltage applications? Yes, the SKR130/18 SKN/26/16 is built to meet industry safety standards for high-voltage environments. It includes overcurrent and overvoltage protection capabilities when paired with appropriate circuit breakers or fuses. Proper installation, insulation, and adherence to voltage/current limits are essential. Reverse voltage polarity must be avoided to prevent damage. Always consult the datasheet for derating and safety margins specific to your application.

(SKR130/18 SKN/ 26/16 / Semicontrolled power diode =YXY)