Phase Control Thyristor C786PCW261 2200V Thyristor Module

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(Phase Control Thyristor C786PCW261 2200V Thyristor Module)

Specification of Phase Control Thyristor C786PCW261 2200V Thyristor Module

The Phase Control Thyristor C786PCW261 2200V Thyristor Module is designed for high-power industrial applications. It deals with a maximum repetitive off-state voltage of 2200V. The component sustains a typical on-state current of 786A. This makes it ideal for heavy-load systems like motor drives, power converters, and voltage regulatory authorities. The device operates accurately under severe electric anxiety. It maintains secure performance throughout a temperature level range of -40 ° C to 125 ° C. Thermal administration is improved through a reduced thermal resistance layout. This lowers warm accumulation throughout extended operation.

The thyristor module uses a press-pack framework. This ensures strong mechanical security. It supplies safe electrical connections even under vibration or shock. The module’s real estate is made with high-purity silicon. This boosts conductivity and reduces energy loss. Advanced passivation layers protect versus ecological aspects like moisture and dirt. The module’s gateway trigger voltage is enhanced for specific control. It requires marginal entrance present to trigger. This lowers power consumption during changing.

Key parameters include an essential rate of increase of off-state voltage (dv/dt) exceeding 1000V/ μs. The rate of rise of on-state current (di/dt) reaches 200A/ μs. These specifications avoid unexpected causing under rapid voltage or present adjustments. The component’s reverse recovery time is short. This makes sure efficient procedure in high-frequency circuits. It supports both stage control and correction functions.

Installation is uncomplicated. The module’s standardized measurements match common industrial mounting systems. It includes integrated heat sinks for simple thermal user interface configuration. Maintenance demands are reduced. The robust building and construction withstands wear from repeated changing cycles. Safety functions consist of overvoltage and overcurrent defense. These prevent damage during fault problems.

The C786PCW261 complies with global criteria like IEC 60700 and UL 508. It undertakes rigorous testing for quality assurance. Applications include electric locomotives, steel mills, and renewable energy systems. The component’s style prioritizes dependability in rough settings. It makes certain constant performance in important power control jobs.

Substitutes or upgrades to older thyristor systems are streamlined. Compatibility with standard drive circuits lowers assimilation effort. The component’s long life span reduces complete ownership expenses. Technical assistance and documents are offered for seamless execution.

(Phase Control Thyristor C786PCW261 2200V Thyristor Module)

Applications of Phase Control Thyristor C786PCW261 2200V Thyristor Module

The Phase Control Thyristor C786PCW261 2200V Thyristor Component is designed for high-power commercial applications requiring precise control over electric currents. It operates at 2200 volts, making it suitable for systems requiring durable voltage handling. This module masters phase control, making it possible for exact modification of power flow in air conditioner circuits. It is generally utilized in motor speed controllers, industrial furnace, and voltage law setups.

The thyristor module makes sure reputable efficiency in atmospheres with varying loads. Its layout minimizes power loss during procedure, enhancing general effectiveness. The tool takes care of high existing degrees without overheating, thanks to advanced thermal management. This makes it perfect for heavy-duty equipment in making plants or energy distribution networks.

Industrial electric motor drives take advantage of the module’s capability to smoothly adjust motor rates. This decreases mechanical anxiety and prolongs devices life-span. In heating applications, it preserves regular temperature control by controling power supplied to repellent tons. The component’s rapid switching capability guarantees fast feedback to adjustments in tons conditions.

Renewable energy systems use this thyristor to take care of power conversion in solar or wind installments. It stabilizes outcome by regulating the transfer of energy in between sources and grids. The 2200V rating offers a security margin in high-voltage setups, preventing failures during rises.

Train grip systems depend on the module for efficient control of locomotive electric motors. It sustains variable speed operations while taking care of the high currents typical in rail networks. The durable building guarantees toughness in severe atmospheres, consisting of exposure to resonances or temperature extremes.

Reduced conduction loss is a vital function, reducing squandered power during operation. This lowers functional expenses over time. The module’s portable style permits easy integration right into existing systems without major adjustments. Maintenance needs are minimal as a result of its high integrity and long life span.

Compatibility with standard control interfaces simplifies installment. Engineers can implement it using standard control circuits, preventing complicated arrangements. The thyristor meets international safety and security requirements, ensuring conformity in international markets. Evaluating under severe conditions confirms its efficiency stability, also throughout extended use.

Industries prioritize this module for its equilibrium of power handling and accuracy. It resolves difficulties in modern-day electrical systems, from energy effectiveness to load administration. The C786PCW261 continues to be a useful option for updating heritage systems or designing brand-new high-performance applications.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Phase Control Thyristor C786PCW261 2200V Thyristor Module, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Phase Control Thyristor C786PCW261 2200V Thyristor Module

The C786PCW261 2200V Thyristor Module is a phase control device for high-power applications. It manages AC power flow in industrial systems. Here are common questions about it. What is this thyristor module used for? It controls electrical power in equipment like motor drives, voltage regulators, and industrial heaters. It switches high voltages quickly. This makes it suitable for heavy-duty operations. What voltage can it handle? The module has a 2200V blocking voltage. This allows use in circuits with high voltage demands. It supports steady performance under stress. The design prevents voltage spikes from damaging connected devices. How does it handle heat? The module includes a built-in heatsink. Efficient thermal management reduces overheating risks. Proper mounting on a cooling surface is necessary. This ensures heat spreads evenly. Follow the manual’s installation guidelines. What safety features does it offer? The module has overcurrent and overvoltage protection. These safeguards prevent failures during sudden power surges. Insulation layers isolate internal components. This minimizes short-circuit risks. Regular maintenance checks are still advised. How long does it last? Lifespan depends on operating conditions. Typical use under rated specifications ensures years of service. Avoid exceeding temperature or current limits. Dust and moisture exposure can shorten durability. Clean the module periodically for optimal function.

(Phase Control Thyristor C786PCW261 2200V Thyristor Module)