TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR)

Specification of TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR

The TECHSEM phase control thyristor Y40KPE series, including models KP800A1800V, KP800A1200V, KP800A1400V, and KP800A1600V, is a high-performance silicon-controlled rectifier (SCR) designed for demanding industrial applications. These thyristors are engineered to deliver reliable and efficient phase control in high-power systems, making them ideal for use in motor control, power regulation, and other heavy-duty electrical applications.

The Y40KPE series features a robust design with a maximum average forward current rating of 800A, ensuring it can handle substantial power loads with ease. The thyristors are available in multiple voltage ratings, including 1200V, 1400V, 1600V, and 1800V, providing flexibility for various voltage requirements. This wide range of voltage options allows the Y40KPE series to be utilized in diverse applications, from medium-voltage systems to high-voltage industrial setups.

One of the standout features of the Y40KPE series is its low forward voltage drop, which minimizes power loss and enhances overall system efficiency. The thyristors also exhibit excellent thermal stability, thanks to their advanced construction and high-quality materials, ensuring reliable operation even under extreme temperature conditions. Additionally, the Y40KPE series is designed with a high surge current capability, making it highly resistant to transient overloads and ensuring long-term durability.

The TECHSEM Y40KPE thyristors are housed in a compact and rugged package, making them easy to integrate into existing systems while providing robust protection against environmental factors. These SCRs are compliant with international standards, ensuring high reliability and safety in industrial environments. Whether used in power converters, motor drives, or other phase control applications, the Y40KPE series delivers consistent performance, making it a trusted choice for engineers and technicians worldwide. With its combination of high current capacity, versatile voltage options, and exceptional reliability, the TECHSEM Y40KPE series is a top-tier solution for advanced power control needs.

(TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR)

Applications of TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR

The TECHSEM phase control thyristor Y40KPE, including models such as KP800A1800V, KP800A1200V, KP800A1400V, and KP800A1600V, is a high-performance semiconductor device designed for a wide range of industrial and commercial applications. These thyristors, also known as silicon-controlled rectifiers (SCRs), are engineered to handle high current and voltage levels, making them ideal for phase control, power regulation, and switching applications. With a robust design and reliable performance, the KP800A series is a versatile solution for demanding electrical systems.

One of the primary applications of the TECHSEM KP800A thyristor is in phase control systems, where it is used to regulate the power delivered to loads such as heaters, motors, and lighting systems. By controlling the phase angle of the AC waveform, these thyristors enable precise adjustment of power output, ensuring efficient energy usage and optimal performance. This makes them particularly valuable in industrial heating systems, where temperature control is critical, and in motor speed control applications, where smooth and accurate operation is required.

The KP800A series is also widely used in power supply units and rectifiers, where it converts AC power to DC power with high efficiency and reliability. Its ability to handle high current and voltage ratings, such as 800A and up to 1800V, makes it suitable for heavy-duty applications in industries like steel manufacturing, chemical processing, and renewable energy systems. Additionally, these thyristors are commonly employed in soft starters, which reduce mechanical stress on motors and extend their lifespan by gradually increasing the voltage during startup.

Durability and thermal stability are key features of the TECHSEM KP800A thyristor, ensuring consistent performance even under harsh operating conditions. Its compact design and ease of integration make it a preferred choice for engineers and designers seeking reliable power control solutions. Whether used in industrial automation, power distribution, or energy management systems, the TECHSEM KP800A thyristor series delivers exceptional performance, making it a trusted component in modern electrical and electronic applications.

Company Profile

Luoyang Datang Energy Tech Co.Ltd(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR

The TECHSEM phase control thyristor Y40KPE, including models like KP800A1800V, KP800A1200V, KP800A1400V, and KP800A1600V, is a high-performance ordinary thyristor designed for robust and reliable phase control applications. Here are five frequently asked questions about this product:

1. **What is the primary application of the TECHSEM Y40KPE thyristor?**
The TECHSEM Y40KPE thyristor is primarily used in phase control applications, such as power regulation in industrial equipment, motor speed control, and voltage regulation in high-power systems. Its ability to handle high currents and voltages makes it ideal for demanding environments.

2. **What are the key specifications of the KP800A series thyristors?**
The KP800A series, including models like KP800A1800V, KP800A1200V, KP800A1400V, and KP800A1600V, features a maximum current rating of 800A and voltage ratings ranging from 1200V to 1800V. These thyristors are designed for high-power applications and offer excellent thermal and electrical performance.

3. **How does the TECHSEM Y40KPE ensure reliability in high-power applications?**
The TECHSEM Y40KPE thyristor is built with advanced semiconductor technology, ensuring low power loss, high surge current capability, and excellent thermal stability. Its robust construction and precise manufacturing processes make it highly reliable in high-stress environments.

4. **What are the thermal management requirements for the KP800A series?**
Proper heat dissipation is critical for the KP800A series due to its high current and voltage ratings. It is recommended to use appropriate heat sinks and cooling systems to maintain optimal operating temperatures and ensure long-term reliability.

5. **Can the TECHSEM Y40KPE thyristor be used in AC and DC circuits?**
Yes, the TECHSEM Y40KPE thyristor is suitable for both AC and DC circuits. Its phase control capabilities make it versatile for various applications, including rectification, power regulation, and switching in both types of circuits.

In summary, the TECHSEM Y40KPE thyristor, including the KP800A series, is a high-performance component designed for demanding phase control applications. Its robust design, high current and voltage ratings, and reliability make it a preferred choice for industrial and high-power systems.

(TECHSEM phase control thyristor Y40KPE KP800A1800V KP800A1200V KP800A1400V KP800A1600V ordinary thyristor KP800A SCR)